2019 Chevrolet Suburban
Mileage
130,813
Service Date
5/8/2024
Services Performed
- STATE INSPECTION
- Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core in both directions. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation. Includes 1 gallon of Antifreeze.
- Serviced as requested.
- Remove cover. Remove old gasket material, drain old fluid. Inspect internals and reassemble with new gasket. Install new fluid to proper level. Road test vehicle for proper operation.
- Remove cover. Remove old gasket material, drain old fluid, inspect internals and reassemble with new gasket. Install new fluid to proper levels. Road test vehicle for proper operation.
- ALTERNATOR DRIVE BELT – Remove & Replace – [Includes: Serpentine and V-Belt type Belt(s).]
- A/C COMPRESSOR DRIVE BELT – Remove & Replace – [Includes: Serpentine and V-Belt type Belt(s).]
- Turn Rotors Or Replace, Pack Front Bearings if applicable, Clean and Lubricate Caliper Guide Pins, Replace Pads
- Turn Rotors Or Replace , Replace Pads with Organic
- CONDENSER – Remove & Replace – [Includes: R&I Air Cleaner.] – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
- Service air conditioner. Check condition of all belts and lines. Evacuate and recharge with reclaimed R-134. Test system performance.Check for leaks.
- REMOVE AND REPLACE REAR A/C LINE
- SPARK PLUGS & PLUG WIRES- Remove & Replace
MARK C. gave our service a 5 star review on 5/9/2024
